Frequently Asking Question

FAQ's on Borewell Drilling

  • Borewell Drilling
  • Borewell Cleaning

We specialize in drilling 412" and 612" borewells with high-speed hydraulic rigs and trained geologists. Groundwater Surveyors are also available to assist customers in determining the borewell point and installing submersible, jet, and hand pumps.

We have successfully completed 30 years.
We providing our Borewell Driling Service in and around Kangeyam
We offer our Drilling service in affortable price with 100% quality assurance.

Since ground water can shift at any time, a borewell must be flushed on a regular basis for the best yield and borewell protection. We have vast experience flushing and cleaning borewells using a high-pressure air compressor that eliminates raw water, dust, or wastes, as well as any decayed particles.

We have been serving both rural & city clients in Kangeyam.
We offer you cost-effective services 24/7.

Our focus is to exceed your goals, meet your timelines and successfully manage your budget. We provide our clients with top-notch general contracting, construction management, site surveys and design build services.

We have successfully completed projects in numerous states.
We is licensed to perform general contracting work in most states.
We will be open to obtaining new licensing if an opportunity arises

FAQs

What is the normal borewell diameter used for domestic purposes?

Borewells with a diameter of 4.5 and 6 inches are commonly drilled for domestic usage. Although 4.5 inch borewells are the most common for domestic use, 6 inch borewells are drilled when a higher yield is needed for large apartments or houses, as well as for agricultural use. Prior to drilling the specified size, larger diameter bits are used to position the casing pipes up to the hard rock zone.

How far should a borewell be from a septic tank or soak pit?

It's always a good idea to keep a safe distance between a borewell and a septic tank because pollution is a possibility. If the situation calls for it, properly grout the borewell casing pipe with cement slurry before hard rock forming. Borewells used for drinking and septic systems should not be found in shallow aquifer areas.

What kinds of casing pipes are used in borewells?

PVC pipes are currently commonly used as casing pipes. Due to corrosion, GI/Mild steel casing tubing, which were previously used, are no longer recommended. PVC casing pipes installed in borewells must comply with the Bureau of Indian Standard IS 12818: 1992, which regulates the specification for thermoplastic PVC screen and casing pipes for borewells.

Is there a best time to drill a borehole?

As a result, if the location of the site has sufficient ground water capacity, there is no particular season for drilling a borewell. Identifying a suitable site and drilling the borewell during the summer months, on the other hand, would result in the worst possible situation in the location at the time. As a result, some experts suggest that the perfect time to dig a new borewell is during the summer months

Did all borewells produce water?

The majority of bore wells, according to us, produce water. Just a few were fully dry. We had drilled 85% of bore wells with a high yield, 10% with a good yield, and 5% with no yield. Our water divining success rate is between 90% and 95%. To preserve the yield and quality of water, we suggest cleaning/flushing your bore well every 5 years.

Approximately, How much would you charge for drilling a bore well?

Best Borewell Drillers in Kangeyam

Borewell drilling costs are calculated based on the following factors in terms of per feet:

  • Price of drilling a bore hole
  • The price of a casing pipe
  • The pipe's installation
  • Charges for Flushing and Cleaning (after the drilling work)
  • Fees for transporting the borewell machine to the borewell site

FAQs

Is borewell water suitable for domestic use?

Bore well water is purer than water from the Fresh River or a lake. Dissolved solids, salts, and minerals will still be present. Hard water will be present in some of the bore well water. If you have any questions about the freshness of the bore well water, you can test it before drinking it.

What precautions should be taken while drilling a bore well?

Casing pipes must be installed during the drilling of a bore well. It may be PVC or GI. This is done to keep sand-laden surface water from accessing the bore well. These pipes are embedded in hard rock under the soil. Casing pipes weigh between 4 and 8 kilograms. Filtration may also be used to avoid muddy water and increase surface yield. Bore wells must be kept closed in order to prevent this from occurring. To avoid bore silting and damage, pumps must be installed as soon as possible.

Customer service is available at New Kalaimagal Borewell?

Yes, of course! You may simply fill out the Contact Us form. We will get back to you as soon as possible.

Do you have borewell cleaning/Flushing services?

Yes, We offer Borewell Cleaning/Flushing Service. In order to clean boreholes, we use well-equipped instruments. Our technicians are always up to date with the latest technologies and use state-of-the-art equipment to ensure a detailed borewell cleaning.

what types of pumps used by new kalaimagal borewell in drilling?

Submersible pumps, hand pumps, and compressor pumps are the most widely used pumps for bore wells. Submersible pumps, Mono blocks, Centrifugal jet, Bore well submersible, Compressor pumps, Hand pumps, Solar Submersibles, Pressure boosters, Piston Pumps, Turbine pumps, and other forms of pumping systems can all be used.

What is the purpose of drilling a 4.5 borewell?

4.5 inch Borewell Drillers in Kangeyam

4.5 inch Borewell Drilling is mainly used for Domestic use, Agricultural, Hotels and for Industrial water supply , Irrigation Unit.

GET OUR BEST BOREWELL DRILLING SERVICE

Contact us for your borewell drilling & Borewell cleaning/Flushing in and around Kangeyam

Address:

Near Indian Oil Petrol Bunk,
Coimbatore Road,
Kangeyam,
Tamil Nadu, India 638 701.